cnc milling insert, square shoulder milling insert for steel,carbide milling cutter,tungsten carbide milling inserttungs
we can produce cnc milling insert with difference size for you
cnc milling insert details:
1.Name: cnc milling insert
2.Raw materials: tungsten carbide,carbide
3.Application arange:Low-carbon steel,Soft steel,High-carbon steel,Alloy steel,Stainless steel,Cast iron,
Al alloy steel,High-temperature alloy
4.Suitable Grades:YBC301,YBC302,YBM251,YBM253,YBM351,YBD152,YBD252,YBG102,YBG202,YBG205,
YBG302,YBG152
Grade introduction for tungsten carbide cnc milling insert for steel:
YBC301:
Combination of hightoughness,high-strength substrate and coating composed of TiCN,thin Al2O3 and TiN.
Suitable for semi-finish and rough milling of P-type material
YBM251:Combination of hightoughness,high-strength substrate and coating composed of TiCN,thin Al2O3 and TiN
Suitable for semi-finish and rough milling of P- and M-type material
YBM253:Combination of high-toughness gradient substrate and coating composed of TiCN and ultrafine Al2O3
Suitable for rough milling of M-type material
YBM351:Combination of high-toughness substrate and coating compoed of TiCN,thin Al2O3 and TiN
Suitable for rough milling of P- and M-type materia
YBD152:Good combination of substrate with high wear-resistance and coating composed of TiCN and thick Al2O3
Suitable for finish and semi-finish milling of K-type material
YBD252:Good combination of substrate with high wear-resistance and coating composed of TiCN and thick Al2O3
Suitable for rough and semi-finish milling of K-type material
YBG102:fine carbide substrate + Nano coating
Suitable for finish and semi-finish milling of K-type material
YBG202:Substrate with excellent deformation resistance + Nano coating
PVD grade with wide application, widely applied in semi-finish milling of P-, M- and S-type material
YBG205:Ultra fine carbide substrate +Nano coating
Suitable for rough milling of M-type material
YBG302:Substrate with good toughness and strength + Nano coating
Suitable for rough milling of P- and M-type material
YBG152:Substrate with moderate hardness and strength + Nano coating
Suitable for rough and semi-finish milling of K-type material
Chipbreaker selection for tunsten carbide cnc milling inserts:
|
function
|
For finishing |
For semi-finishing |
For roughing |
| P |
-DF |
-DM |
-DR |
| M,S |
-EF |
-EM |
|
| K |
-CF |
-CM |
-CR |
| AL |
-LH |
Cutting edge treatment selection for cnc milling insert for steel:
| Treatment of cutting edge |
Recommended selection |
| SP¨¨EDER/L |
Honing edge is suitable for semi-finish and finish machining of steel and stainless steel |
| SP¨¨EDFR/L |
Sharp cutting edge is suitable for finish machining of cast iron materials |
|
SP¨¨EDSKR/L
SP¨¨EDS¨¨R/L
|
After chamfering and honing, the edge has strong anti-breakage capability, suitable for rough
machining of steel parts under poor working conditions
|
|
SP¨¨EDTKR/L
SP¨¨EDT¨¨R/L
|
Chamfered edge is suitable for semi-finish and finish machining of steel, stainless steel and cast
iron materials.
|
| SP¨¨EDR/L-GM |
3D chipbreaker can reduce cutting force, reinforce the capability of chip
control, and improve insert life. It is widely applied in semi-finish machining of steel, stainless steel and cast iron
materials.
|
Shenzhen Lys Technology Co., Ltd
Company address: 20th floor, Saigeyuan building C, Huaqiang south road, Futian district, Shenzhen China
Factory address: No. 57 Jinshan industrial park, Hetang district, Zhuzhou City, Hunan province China
Tel: 0086-731-22397993 Fax: 0086-731-22623865
E-mail: peter@lystechnology.com linda@lystechnology.com
Website: www.lystechnology.com www.lyscarbide.com http://lystechnology.en.gasgoo.com
|
|
cnc milling insert, square shoulder milling insert for steel,carbide milling cutter,tungsten carbide milling inserttungs Images
|
